Technology
Insole-King offers the latest in-house developed scan
technology for scanning feet, lasts and moulds.
Black-Boxx - I HDF scanner
The Black-Boxx - I HD Foot scanner is a new developed
foot check and analysis device, which can easily be
placed in a shop or measuring room. It uses advanced
scan technology in combination with online software.
The scanner is directly controlled and installed from
the online software (website). The online software gives
an automatic advise for a footcare product such as a
Manhattan insole or a Manhattan shoe. This is based
on the automatic recognition of the foot type, the length
and width measurement of the foot.
Web-King 3D Laserscanner 1200 The Web-King Laser Scanner 1200 is an online
laser scanning system to capture data from foamboxes
and / or plaster forms.
The scanner scans 2 foam boxes (left and right foot)
at the same time within 15 seconds. After the scanning
procedure, you can see the result on your screen.
Insole-King - Dr. Pressure sensor
plate
With this wireless pressure measurement platform, you
can measure the pressure of the sole while walking on
bare feet. You can place the platform at any place on
the floor and after measuring you can easily pick it
up with use of the handle and store it.
The platform contains 4096 sensors, spread over the
measuring surface of 48cm x 48cm. This large surface
ensures maximum contact with the platform, as well as
that the patient does not have to think about where
to walk nor changing the walking rhythm.
The data exchange between the platform and the computer
is wireless, which results in fast data exchange.
Insole-King
- A3 Foot Scanner This A3 scanner is a sophisticated scanning device,
which is ideally suitable for taking digital measurements.
The scanner is fitted with a USB port, therefore the feet
can be scanned quickly and easily. The picture is immediately
imported into the chosen software system. From there,
you can print the foot data, e-mail it or fax it.
Insole-King - 3D Footmodeller With the 3D Footmodeller feet, plaster casts
or lasts can be digitised in 3D. Because the elastic
foil encloses the object perfect, it makes a 100% copy
of the object, which is digitised. Feet of patients
can be scanned standing up or sitting down. The scanner
scans the feet up to 3,5cm with an accuracy of 0,5mm.
Within 10 seconds the measurement is made and because
of it's shape and weight, it is very mobile. The scan
data is compatible with the Insole-King Cad software,
therefore it can be adjusted for designing insoles.
.JPG)
